Contact Information

AftercoolerSales.Com

Festus, Missouri 63028
503-653-5571
sales@aftercoolersales.com

Click Here To Email Us

.

Send Us Email

This image has an empty alt attribute; its file name is Pneu-Light-2832-50-80kb.jpg — Air Drive- 13 cfm- 6,025 Lumens- Magnetic- Waterproof to 100 feet

La-Man Coalescing Filters — 99.9% Efficient Oil/Moisture/Particle Removal from 15 CFM to 2,000 CFM –
LIFETIME WARRANTY

Venturi Air Movers — Use for exhaust or blow air in to tanks etc. Available with water misters for worksite cooling.

Portable Grade D Air Preparatiion — Portable Grade D air preparation for two men.

Single man Grade D Air Preparation — Grade D Air Preparation with CO and paint solvent audible alarm worn on belt.

Respirator Choices — Multiple respirator choices are available including full NIOSH approved blast helmets.

5'x20' dust sock, 20" fan and ducting — Control your environment with dust socks

Funnels and Media Screens — Fast, easy filling of blast pots with properly screened material.

Featured Pages

AftercoolerSales.Com, LLC features the Best of the Best in sandblasting support equipment. Aftercoolers, Coalescing oil/water/particle removal, High volume fans, air movers and dust socks. Grade D breathing air and respirators. We will help you make sense of it all.

Aftercoolers

Blasting and painting professionals know that dry compressed air is crucial to successful surface preparation. Flash rusting, clogged blast pots, corroded valves, wasted media and paint fisheyes are common problems caused by wet, oily air and can be prevented. AftercoolerSales.Com aftercoolers and coalescers work as a team to provide an economical moisture removal solution and allow you to get the job done right with properly […]

Moisture Removal

La-Man’s Extractor/Dryer® The patented Extractor/Dryer® is a two-stage, point-of-use compressed air filter. Designed primarily for the final usage of air, it will remove water, oil and other contaminates from compressed air lines. The Extractor/Dryer was developed for air driven tools, paint spraying, manufacturing equipment or any other compressed air equipment to produce clean, dry compressed air. In return you receive extended equipment life, improved product […]

Respirators

The OSHA standard for respirator protection is here: 29 CFR 1910.134 It is more clearly stated here per Occupational Health and Safety Magazine https://ohsonline.com/Articles/2003/05/Selecting-Between-Supplied-Air-and-Powered-Air.aspx?Page=2 Per Bullet Point – Paragraph three Distribution system: From the compressor, the air has to be transported to the work area where the workers can use it. Air distribution manifolds are a common way of aiding employers with this task. These […]

Fans, Dust Socks and more

Ask Us About Them Here Ask Us About Them Here

We help you work safely and efficiently

La-Man’s Extractor/Dryer®

The patented Extractor/Dryer® is a two-stage, point-of-use compressed air filter. Designed primarily for the final usage of air, it will remove water, oil and other contaminates from compressed air lines. The Extractor/Dryer was developed for air driven tools, paint spraying, manufacturing equipment or any other compressed air equipment to produce clean, dry compressed air. In return you receive extended equipment life, improved product quality, reduced downtime, and savings on costly repairs to damaged equipment. These advantages will pay for themselves in a short amount of time.

La-Man Standard Features include:

Differential Pressure Gauge (All models except 520’s and 195A) – Allows the user to visually see the change from green to red, indicating a pressure drop of 10 PSI or greater you will need to service the elements. Service Kits available for all models
Weep Drain – Allows minimal, continuous flow of contaminated air to escape the base of the unit.
Mounting Brackets (All models except 520’s and 195A) – Allows for easy and protective mounting of your Extractor/Dryer.

EXTRACTOR/DRYER – HOW IT WORKS:

(1) Compressed air containing tiny particles of dirt, dust, oil, rust and moisture enters the first stage of the La-Man® Extractor/Dryer Filter.
(2) A coalescing effect occurs as air passes through a cartridge mesh filter, which captures larger particles and causes moisture to form larger droplets.
(3) Air velocity lessens as it enters the extraction chamber allowing particles to collect and moisture to condense on the honeycomb.
(4) Particle-laden liquid flows along the bottom and out the drain.
(5) Air passes through the second stage wire supported fiber filter cartridge, which captures remaining particles down to 5 microns (smaller microns down to 0.01 are available).
(6) Remaining moisture and contaminants are dried and filtered in the second stage filter.
RESULT: Exhaust air is clean and dry – no dirt, rust, oil, or moisture or disrupt air equipment operation.

Ask Us About Them Here

Blasting and painting professionals know that dry compressed air is crucial to successful surface preparation. Flash rusting, clogged blast pots, corroded valves, wasted media and paint fisheyes are common problems caused by wet, oily air and can be prevented. AftercoolerSales.Com aftercoolers and coalescers work as a team to provide an economical moisture removal solution and allow you to get the job done right with properly conditioned, clean, dry compressed air.

— LIFETIME WARRANTY —

Ask Us About It Here

Each unit is hand crafted and TIG welded

Made in USA

LIFETIME WARRANTY on both units -- Mobile Air Package -- 400 CFM — LIFETIME WARRANTY on both units — Mobile Air Package — 400 CFM

Typical clean aftercooler to coalescer installation — Clean service van wall-mount of 400 CFM aftercooler- braided flex pipe/coupler- 500 CFM coalescing filter- flex-pipe/coupler- Custom stainless air distribution manifold. Grade D air filter at the end.

400 CFM aftercooler mounted to tongue of air compressor — Air compressor fixed mount

The 400 CFM Aftercooler Package will work the same way by lowering the dew point to within 15* of ambient. The 500 CFM coalescer will remove an even larger volume of oil and liquids from the supplied air lines.

Ask Us About It Here

Just for you, check these out!

AftercoolerSales.Com, LLC features the Best of the Best in sandblasting and painting support equipment. Aftercoolers, Coalescing oil/water/particle removal, High volume fans, air movers and dust socks. Grade D breathing air and respirators. Pneumatic motor waterproof LED magnetic lights. We will help you make sense of it all.

High Performance Aftercoolers.

..... EXCLUSSIVE LIFETIME WARRANTY ........ 200 CFM and 400 CFM

Patented 99.0% Removal of Oil-Water-Particles

LIFETIME WARRANTY - Efficient coalescing oil/water removal from your air being used by your blast pot, your air tool and paint guns. No desiccants or additional refrigeration equipment needed for normal operations.

Air movers and Dust Socks

Sand and Soda Blasting generates dust. The Black Maxx Fans offer multiple sizes to match your jobs needs. Dust is contained in sateen canvas dust socks. Full length zipper for clean-outs.

Aftercoolers and Coalescing Filters

LIFETIME WARRANTY - 200 CFM & 400 CFM Aftercoolers and the 250 cfm AND 500 cfm Coalescing Oil/Water/Particle Filtration. Each unit Handcrafted in USA. Performance Satisfaction is Guaranteed!

Testimonials

Maecenas aliquet lectus sodales, hendrerit nisi ac, tempus tortor. Curabitur tempus lorem sit amet odio vehicula consequat. Phasellus molestie nibh vitae ligula euismod fringilla. Praesent in erat diam. Proin aliquam dui sit amet diam euismod pulvinar. Vestibulum tempus scelerisque metus bibendum feugiat. Morbi vitae odio ex. Nam vulputate nisi erat, faucibus ullamcorper ligula fringilla luctus.

Client 1

Company 1

Your Newest Team Member

John was a professional repair technician in electronics and automated commercial/industrial equipment prior to opening his first business at age 25. He sold, installed and repaired large automotive equipment for a number of years which led to soda blasting. He currently has over 30 years experience in the soda blasting, cob blasting and sandblasting world. His company, Eco-Blast.Com, LLC began manufacturing soda/cob blasting pots 17 years ago and introduced the first All-Media Soda Blast Pot. A sister company, Soda-Blast.Com was his on-site and in-house blast booth labor arm providing service to residential, commercial and industrial customers. He knows blasting and he knows equipment. He can help you choose and design systems to meet your needs.

John R Harmon

President

Our Partners

We are proud partners with companies that are leaders in their fields. Combining our own technical and real world knowledge with the expertise of our partners provides you with the very best, most informed information and innovative products available. Your success is our success.