Air-Driven LED Work Light
6,025 lumens & WaterProof to 100 Feet
- Intrinsically Safe
- Compressed Air Motor Driven
- Operates in dry, damp or wet environments.
- Waterproof underwater to depth of 100 feet
- T6 Aircraft Grade Aluminum Housing
- Sealed Bearings for Extended Life
- Floodlight Pattern for Maximum Visibility
- Operational from 40 PSI to 120 PSI
- Lumen output = 430 lumen@40 PSI (uses 1.5 CFM)
- Lumen output = 6,025 lumen@120 PSI (uses 13.1 CFM)
- LED Life Expectancy = 10,000 Hours
- Extremely Reliable
- Apex Certification applied for
For efficient performance, a regulated supply of clean, dry air is recommended. The Pneu-Light can operate from 40 to 120 psi (2.7 to 8.3 bar). A regulator can be used to control pressure, but pressure can also be controlled via an in-line ball valve at the compressed air line source. Aftercoolers and La-Man coalescing moisture extraction should be connected to the compressor and feeding the air line to the LED. No lubrication is needed as it employs sealed bearings.
The Pneu-Light can be easily mounted to a metal wall, ceiling or floor via the magnetic base. The magnets inside the base are easily activated to lock the unit in place and deactivated to remove the unit. Simply move each magnet’s lever to the on or off position. The exterior of the magnet housing is nickel plated for spark resistance.
The Pneu-Light can also be used under water! The Pneu-Light must be started above the water surface. To keep air bubbles from interfering with the light, an exhaust hose must be attached as described above. The Pneu-Light can be safely used to a depth of 100 feet (30 meters).
The Pneu-Light can also be safely used in wet environments. The temperature of the Pneu-Light will approximately equal the temperature of the compressed air being used. In tests with a cool compressed air supply, the Pneu-Light maintained a temperature consistent with the surrounding ambient air temperature.